Lifestyle

Make Your Own Woven Rag Rug


Anyone could make this woven rag rug, and it’s SO straightforward to customise it to be any measurement, form, or coloration you want on your house.

I wished to make a woven rag rug that was cute, woven, comparatively straightforward for a first-time rug maker. After a little bit of analysis, I discovered the right woven rug that matches all my wants!

If you’ve a number of previous bedsheets round, that is the right means to make use of them (and get an lovely rug out of the method).

Make Your Own Woven Rag Rug abeautifulmess.com

Make Your Own Woven Rag Rug abeautifulmess.com

Supplies:
-3 king-size flat cotton bedsheets

-piece of cardboard (23″ x 43″)
material scissors
masking tape
-marker
clear ruler

Make Your Own Woven Rag Rug abeautifulmess.com

Step One: Use your ruler and marker to make a mark each 2″ throughout the longest aspect of every of your bedsheets. Use material scissors to make a 2″ minimize at every mark.

Make Your Own Woven Rag Rug abeautifulmess.com

Make Your Own Woven Rag Rug abeautifulmess.com Step Two: At every minimize, rip the material aside (it ought to tear evenly all the way in which throughout the sheet). Repeat this course of till every sheet is ripped into even strips. Separate strips by coloration and sample.

Make Your Own Woven Rag Rug abeautifulmess.com

Step Three: On every of the brief ends of your cardboard, begin 2″ from every finish and mark 2″ lengthy strains each 1/2″. Use scissors to chop 2″ slots at every mark. 

Make Your Own Woven Rag Rug abeautifulmess.com

Step Four: Gather three material strips of varied colours into a gaggle, fold the group in half lengthwise, and place one finish into the primary slot (it ought to dangle over the sting a number of inches).

Place the opposite finish into the corresponding spot on the other aspect. If you’ve a number of strings hanging off the perimeters of your strips, attempt to pull the large clumps of strings off earlier than you place into the cardboard slots.

Repeat this course of for every strip throughout the cardboard. It will get fairly full after you’ve a number of teams positioned, however simply hold going till you might be accomplished.

Make Your Own Woven Rag Rug abeautifulmess.com

Make Your Own Woven Rag Rug abeautifulmess.com Step Five: Designate one coloration as your weaving strip, and wrap a bit of masking tape round one finish to make it simpler to weave by way of the strips.

Starting about 2″ in from the top of your cardboard slots, start to weave the weaving strip below and over every group till you get to the opposite aspect.

Make certain to go away a 6″ tail at your starting spot (you’ll lengthen this on the finish). Because the cardboard is so full, the primary row of weaving would be the hardest because it’s troublesome to inform one group from one other.

Just do the most effective you possibly can—in case you get a number of strips into the flawed bunch, it gained’t make a distinction on the finish.

Once you get to the opposite finish together with your weaving strip, make a U-turn by going over or below the final bunch (whichever is required relying on the place you find yourself), and weave your means again to the opposite aspect (it must be a lot simpler this time).

As you end every row, straighten out the weaved strip together with your fingers and slide it as near the row earlier than it as you possibly can.

Repeat the weaving course of till you’re about 2″ from the cardboard slots on the opposite finish of the rug. Make certain to concentrate to the width of your rug as you go, and hold it as at the same time as you possibly can.

This sort of weaving offers you a number of management over your width since you possibly can merely tighten or loosen your strip as you make the flip at every finish.

When you get to the top of your weaving strip, you’ll wish to be part of a brand new strip to the present one so you possibly can carry on weaving.

Cut a slot into the top of your weaving strip and the start of your new strip, and pull an inch or two of your new strip by way of the slot on the present strip.

Pass the tail finish of your new strip by way of the slot on the brand new strip and pull tight. Now you’ve an extended strip! Keep doing that every time you’ll want to prolong your weaving strip.

Make Your Own Woven Rag Rug abeautifulmess.com

Step Six: To end the ends, make a U-turn across the final bunch the place your weaving ended, and thread your weaving strip down by way of the primary uncovered part of your final row of weaving (see above photograph).

Pull tight. Again, cross over to the following uncovered weaving and thread down by way of that part and pull tight. Continue till you attain the top, and tie your weaving strip onto one of many strips within the final group of strips.

Repeat course of on the other finish (you’ll have to affix a strip to elongate the tail of your starting weaving strip first).

Make Your Own Woven Rag Rug abeautifulmess.com

Step Seven: You’re nearly accomplished! Just place a ruler or a bit of cardboard within the place you wish to trim your ends and use material scissors to trim the surplus items. Once the ends are minimize, you possibly can take away the cardboard backing.

You did it! You simply made a rug!

Make Your Own Woven Rag Rug abeautifulmess.com

Make Your Own Woven Rag Rug abeautifulmess.com Make Your Own Woven Rag Rug abeautifulmess.com I’m fairly pleased with my first try at rug making. I feel it’s simply what our house wanted (the colour appears so good with the DIY concrete countertop).

If you favor to purchase a hand-crafted rug, try Elsie’s favourite rugs on Etsy (or our favourite rugs below $250). xo, Laura

Looking for extra DIY rug tutorials?

Woven Rag Rug

How to make a woven rag rug from torn material items.

  • 3
    king-size
    flat sheets
    cotton

  1. Use your ruler and marker to make a mark each 2″ throughout the longest aspect of every of your bedsheets. Use material scissors to make a 2″ minimize at every mark.

  2. At every minimize, rip the material aside, and it ought to tear evenly all the way in which throughout the sheet. Repeat course of till every sheet is ripped into even strips. Separate strips by coloration and sample.

  3. On every of the brief ends of your cardboard, begin 2″ from every finish and mark 2″ lengthy strains each 1/2″. Use scissors to chop 2″ slots at every mark. 

  4. Gather three material strips of varied colours into a gaggle, fold the group in half lengthwise, and place one finish into the primary slot (it ought to dangle over the sting a number of inches).

    Place the opposite finish into the corresponding spot on the other aspect. If you’ve a number of strings hanging off the perimeters of your strips, attempt to pull the large clumps of strings off earlier than you place into the cardboard slots. Repeat this course of for every strip throughout the cardboard. It will get fairly full after you’ve a number of teams positioned, however simply hold going till you might be accomplished.

  5. Designate one coloration as your weaving strip, and wrap a bit of masking tape round one finish to make it simpler to weave by way of the strips. Starting about 2″ in from the top of your cardboard slots, start to weave the weaving strip below and over every group till you get to the opposite aspect.

    Make certain to go away a 6″ tail at your starting spot (you’ll lengthen this on the finish). Because the cardboard is so full, the primary row of weaving would be the hardest because it’s troublesome to inform one group from one other. Just do the most effective you possibly can, and in case you get a number of strips into the flawed bunch, it gained’t make a distinction on the finish.

  6. Once you get to the opposite finish together with your weaving strip, make a U-turn by going over or below the final bunch (whichever is required relying on the place you find yourself), and weave your means again to the opposite aspect (it must be a lot simpler this time). As you end every row, straighten out the weaved strip together with your fingers and slide it as near the row earlier than it as you possibly can.

    Repeat the weaving course of till you might be about 2″ from the cardboard slots on the opposite finish of the rug. Make certain to concentrate to the width of your rug as you go, and hold it as at the same time as you possibly can. This sort of weaving offers you a number of management over your width since you possibly can merely tighten or loosen your strip as you make the flip at every finish.

  7. When you get to the top of your weaving strip, you’ll wish to be part of a brand new strip to the present one so you possibly can carry on weaving. Cut a slot into the top of your weaving strip and the start of your new strip.

    Pull an inch or two of your new strip by way of the slot on the present strip. Pass the tail finish of your new strip by way of the slot on the brand new strip, and pull tight. Now you’ve an extended strip! Keep doing that every time you’ll want to prolong your weaving strip.

  8. To end the ends, make a U-turn across the final bunch the place your weaving ended, and thread your weaving strip down by way of the primary uncovered part of your final row of weaving (see above photograph). Pull tight. Again, cross over to the following uncovered weaving and thread down by way of that part and pull tight.

    Continue till you attain the top, and tie your weaving strip onto one of many strips within the final group of strips. Repeat course of on the other finish (you’ll have to affix a strip to elongate the tail of your starting weaving strip first).

  9. Place a ruler or a bit of cardboard within the place you wish to trim your ends and use material scissors to trim the surplus items. Once the ends are minimize, you possibly can take away the cardboard backing.



Source hyperlink

Leave a Reply

Your email address will not be published.

close